News Releases
Advisory: Networking Infrastructure and Immersive Simulation Results Presented
On Sept. 24, the Naval Research Advisory Committee (NRAC) will brief the results of two recent studies, Future Naval Use of COTS Networking Infrastructure and Immersive Simulation for Marine Corps Small Unit Training.
August 24, 2009
Autonomous Underwater Robot Maintains Naval Commitment to Environment
As the U.S. Navy minimizes its dependence on foreign oil, the Office of Naval Research (ONR) is a front runner in supporting and bringing forth innovative solutions to fuel consumption challenges
August 24, 2009
JDMTP Reviews NMC Project Portfolio
The Navy Metalworking Center (NMC) presented its current and planned projects to the Metals Subpanel of the Joint Defense Manufacturing Technology Panel (JDMTP) July 20-21 at Concurrent Technologies Corporation (CTC) in Johnstown, Pennsylvania.
August 12, 2009
Top Students Compete in Finals of the 12th International Autonomous Underwater Vehicle Competition
Thirty teams of high school and college students from around the world have been gathered in San Diego this week for the 12th International Autonomous Underwater Vehicle (AUV) Competition, sponsored by the Association for Unmanned Vehicle Systems International (AUVSI) Foundation and the Office of...
July 31, 2009
Laser Image Aimed at Achieving 85 Percent Reduction in Costs
An innovative laser imaging technique, developed with funding from the Office of Naval Research (ONR), could cut more than 7,700 man hours from the manufacturing cycle of VIRGINIA-Class Submarines (VCS).
July 30, 2009
Weld Seam Facing Tools Developed under Navy Metalworking Center Project Delivered to Shipyards
Two prototype (preproduction) weld seam facing tools, which were developed under a Navy Metalworking Center (NMC) project, were recently delivered to Bath Iron Works (BIW) and Northrop Grumman Shipbuilding-Gulf Coast (NGSB-GC).
July 23, 2009
Automating the Install of Studs Reducing Labor Hours and Span Times
The process of locating and installing attachments and structural penetrations is very time intensive and has a substantial impact on the cost and schedule of the outfitting of Navy warships, particularly in submarines.
July 23, 2009
NMC Project Work Featured in Journal of Ship Production
Work done through the Navy Metalworking Center (NMC) has been published in the May 2009 issue of the Society of Naval Architect and Marine Engineers’ Journal of Ship Production (JSP).
July 07, 2009
Hot Forming Limits Defined for HSLA-65 and DH-36 Plates Used in CVN 21 and Other Ship Classes
This Navy Metalworking Center (NMC) project assessed the effects of forming temperature and plate thickness on the forming characteristics of HSLA-65 and DH-36 used in hull applications for CVN 21 and other ship classes.
June 18, 2009
New Hull Coatings for Navy Ships Cut Fuel Use, Protect Environment
New hull coatings being developed by the Office of Naval Research (ONR) are showing promise in reducing the build-up of marine crustaceans – namely barnacles – on ships´ hulls, optimizing vessel performance and dramatically reducing fuel costs.
June 04, 2009